日韩在线视频

Suzhou Gerber Precision Mechanical Manufacturing Co., LTD.

Hotline:+86-512-65690871

Standard Test Bench




 


The GBPS series of standard test benches are specially developed by the Company and are applicable for general-purpose testing in the electronics industry.

The main target customer base: automotive electronics, mobile electronics and other customers that need small PCB test.

Based on customer needs, the Company designs and develops the Company's standard framework, which can basically satisfy the size requirements of commonly used test products.




1. As it is strongly universal and small, the desktop machine can be used in conjunction with the production line.

2. Only with change of the fixture, the rapid test products can be switched, so the product is applicable to the product continuity performance test of approximate test points.




Model GBPS-A GBPS-B GBPS-C
Dimensions L*W*H
=578*400/500/600*495mm
L(Customized)
W(same as GBPS-A)
L*W*H
=355*233*495mm
Test Range L*W
=200*160/260/300mm
  L*W
=100*150mm
Motion Stroke 150mm 100mm
Test Points 35/70/105/140 (Optional) Customized
Input Power AC220V 50~60Hz
Compressed Air 0.5~0.7Mpa,6mm Air Tube
Motion Mode PLC/Single Chip Microcomputer + Solenoid Valve + Cylinder
Exception Handling Emergency Stop + Buzzer
Control PowerSupply 24V/4.5A DC
Test
PowerSupply
24V/12V/5V DC (Optional) 24V/5V DC
Input Interface 4-Pin Power Aviation Connector / RS232 RS232
Output interface 37-Pin Power Aviation Connector *N
(Nmax = 4)
RS232
Maximum Pressure 720N (max) 282N (max)
Fixture Mode Base(Optional)+ Fixture(Customized) Customized
Fixture Base Dimensions L*W
=315*300/400/500mm
L(Customized)
W(same as GBPS-A)
N/A
Test program Customized per Products/Output Conduction
(when test power supply is selected)
Customized
Customized or NOT Standard Test Bench   
Customized Test Program
Customized Test Fixture
Customized





Parameter X(System Composition):  
A: The length of the machine is fixed, and its width is changed according to the third place.
B: The length of the machine is unfixed(Customized), and its width is changed according to the third place.
C: With fixed length and width, the machine is specially used to test the PCB function of mobile phones.


Parameter AA(Machine Size):
X1 / X2 / X3: Size of the machine and the fixture (See the product manual for details)

Parameter BBB(Test Points):
35/70/105/140: The test output connector is a 37-pin one, which is increased by an integral multiple. Two COM points can be reserved for each COM connector or be used for all COM connectors.

Parameter CCC(Test Power Supply):
D24/D12/D05 (Optional): The default is set as none. When the test power supply is selected, the internal test circuit of the machine is created and used for conduction test, with a conduction signal sent from the output connector either externally to the indicator board (customized otherwise) or to any other peripheral.

Parameter DD/DD(Stamp / Test Fixture Base)):
 (J+n) / (D+n) (Optional): The default is set as none. J indicates that only fixture bases are attached, and product fixtures are made by customers; D indicates that a fixture (with a base) is customized according to each customer's product; n indicates the number of fixture bases. When n>1, the fixture anti-dead detection function is used for the product conduction test in relation to the approximate test of test points (i.e. common points at which the relevant bits are different).





A. Emergency Stop Button
B. Right Start Button
C. Stop Button
D. Test Fixture Base
E. PASS Indicator
F. FAIL Indicator
G. Left Start Button

Suzhou Gerber Precision Mechanical Manufacturing Co.,Ltd All Rights Reserved 备案号: